Frequently Asked Questions about Sanitation Special Sprinklers

Sprinklers are already one of the sanitation special vehicles. Urban sanitation must have a sprinkler to help clean, spray, cool, and other uses. In the process of using the sprinkler, it is sure to encounter various problems. These problems will directly affect its use, so we must be able to understand clearly. The following Xiaobian has found some common problems in the use of sanitation special sprinklers , we can take a look.

1

Frequently Asked Questions about Sanitation Special Sprinklers

1. How much watering is appropriate? When using a watering vehicle, I feel that the amount of watering should be greater, so that more plants can be watered; in fact, the larger the amount of water is, the better, if the amount of water is too large, there may be water leakage. The problem is that there is a waste of water; if the amount of water is too large, it may lead to the occurrence of water in the area, which will affect the use of pedestrians. However, if the amount of water is too small, water can not be effectively watered and the obvious effect will not be achieved. Therefore, it is necessary to ensure that the amount of water sprayed on the sprinkler is used properly. The specific amount should be determined according to the specific requirements.

2, the width of the sprinkler can be increased. Most of the sprinklers have a width of 14-16m. In the past, this size was far enough for use. However, after the road has been widened, the width of the sprinkler, which is 14-16m, is insufficient and it may cause poor watering effect. Plant watering does not occur. If the width of the sprinkler is not enough, the water pressure and the pump head will increase to increase the width. This will increase the cost of use. Therefore, to increase the width of the sprinkler, it is best to make the width of the sprinkler high. At 20 meters.

There are still many common problems in the use of sanitation sprinklers , but they cannot be introduced completely because of the length of the article. Before using the special sprinkler for sanitation , it is best to understand in detail, so as to avoid trouble in the course of faults during the procedure. When using a water truck, it is also necessary to pay attention to the safety of surrounding pedestrians. The speed of watering in densely populated areas should be reduced to avoid hurting the passing pedestrians and affecting their personal safety.


The bed is made of I-beam, improves the overall bed capacity, the inside is made of stainless steel, greatly prolong the service life of the machine, using parts of domestic and international high-end, machining center bed in Longmen, to ensure the machining accuracy of the machine.

Model

CX9015

CX1325

Working area

900×1500×300

2500×1300×300

Transportation

X/Y axis is rack gear,Z axis is screw

Spindle power

5.5KW

Control system

DSP/NC studio

Command Language

G-code HPGL 3D

Driver

Step motor/Servo motor

Machine Power

6KW

Working Voltage

AC380v/±10%,50HZ

Machine size

2600×1700×1600

3600×2100×1800

weight

1.5T

2T

 

 

Normal Model Stone Machine

Normal Model Stone Machine,Cnc Stone Carving Machine,Stone Machine,Stone Broken Machine

JINAN HT MACHINERY CO.,LTD , https://www.jncncrouter.com