I recently came across this listing on govdeals.com for a 1997 Ford Econoline Ambulance that caught my attention. Here's what I found:
---
The vehicle is listed under the product title **"1997 Ford Econoline AMBULANCE"** with a current bid price of **$5,050.00 USD**, and there have been 10 bids so far. The auction is set to close in approximately **12 days and 6 hours**, specifically on October 14, 2024, at 4:00 PM CDT.
This particular ambulance features a **MOTORIZED CUTAWAY design** and is powered by a robust **7.3L V8 OHV 16V TURBO DIESEL engine**, which is well-suited for its intended purpose. According to the details provided, the vehicle is fully functional, as it **starts and runs smoothly**, and has been regularly serviced and maintained. Additionally, it comes with **two sets of keys**, providing added convenience and security.
One of the standout features of this ambulance is its mileage, which is currently recorded at **94,441 miles**. The seller has confirmed that this figure is accurate, which suggests the vehicle has been well-maintained over the years.
Other notable highlights include:
- A bid increment of **$50.00 USD**, meaning each new bid must exceed the previous one by this amount.
- The fact that it’s a Type 3 Ford E-Series ambulance, which is often used for transporting patients or equipment.
The photos included with the listing show the exterior and interior of the vehicle in good condition. It seems like the seller has done a decent job maintaining both the mechanical and cosmetic aspects of the vehicle.
If you're in the market for an ambulance or perhaps looking to repurpose such a vehicle, this could be worth considering. It’s always important to do your due diligence, especially when purchasing vehicles of this nature, but based on the information provided, it looks promising.
I wanted to share this find with anyone who might be interested—thanks to Martin for pointing it out!
---
Let me know if you'd like any more details about the listing!
Copper Plating Welding Wire
Features:
ER70S-6 is a kind of mild steel copper coated Welding wire, suitable for 100% CO2 and Argon& CO2 mixed gas protective welding with stable feasibility, good welding seams, less spatters and excellent welding process properties.
Application:
Used to weld ship building steel(A,B,D,E,A36,D36,E36)and equivalent mild steel or 550Mpa grade mild alloy steel, such as container building, construction machine, railway construction, pressure vessel for semi-auto or automatic gas shielded welding.
|
1. Wire into the plant must be stored in dry conditions, can not open welding wire coil waterproof packaging.
2. Welding shall be removed before welding surface oil, rust, water and other impurities.
3. The CO2 gas protection, CO2 gas purity 99.98%.
4. CO2 welding protective gas flow rate should be controlled at 20~25L/min.
5. Wire extension length should be controlled in the range of 15~25mm.
|
Copper Plating Welding Wire ,Mig Welding Copper Wire,Copper Plating Wire,Copper Plating Welding Wires
Jiangyin Vankey Machinery Technology Co.,Ltd , https://www.wkweldingwire.com
