China's car successfully developed a new generation of high-power graphene capacitors
On October 9, China Zhuzhou Electric Locomotive Co., Ltd. (China Automotive Industry Corporation) reported that the self-developed new generation of high-power graphite The super capacitor came out.
The company released the news, "3 V / 12000 Farah graphene / activated carbon composite electrode supercapacitors" and "2.8 V / 30000 Farah nano-hybrid nano-capacitors" in Zhejiang Province Science and Technology Achievement and New Products Identification Conference, was identified Performance indicators for living in the leading international level. Depending on capacity and rated operating voltage, a 3 V / 12,000 Farad supercapacitor can be fully charged in 30 seconds and a 2.8 V / 30,000 Farad supercapacitor charges in 1 minute. Compared to activated carbon supercapacitors, graphene / activated carbon composite electrode supercapacitors more energy, longer life expectancy.
Chinese Academy of Engineering Yang Yusheng, Liu Youmei and "National 863 Energy Saving Project" expert Professor Zhang Shichao and other experts unanimously identified: 3 V / 12000 Farah super capacitor and 2.8 V / 30 000 Farah super capacitor represents the world's super capacitor monomer technology The highest level of technology research and development continue to walk in the forefront of the world.
It is reported that the super capacitor is a typical physical energy storage device, charging device than the traditional incomparable advantages. Charging 10,000 times, charging time up to several hours, the risk of explosion and pollution of the environment "VS" 1000000 times, tens of seconds, pollution-free and the risk of explosion. " Vice President of the Technology Center of China Railway Car Corporation and Ruan Dianbo, director of Ningbo Supercapacitor Research Institute, used a series of contrasting images to make a presentation. Ruan Dianbo said super capacitor can be widely used in consumer electronics, rail transit, urban bus system, national defense and aerospace, crane potential energy recovery, power generation and smart grid and other fields.
Currently, supercapacitors are widely used and representative in trams and trolley buses. China's Zhongchuangchuang company developed 9500 Farah, 7500 Farah and many other super capacitors have been widely used in Guangzhou, Ningbo, Wuhan, Huai'an, tram and 196 trolleybus in Ningbo City. Guangzhou Supercapacity, which has been operating for more than six months, is a perfect fusion of Guangzhou Tower and Pearl River. It has become a bright business card in Guangzhou City and is warmly welcomed by people from all walks of life.
3 Volt / 12000 Farad Supercapacitors are suitable for the main drive of the tramcar. The single-charging mileage is up to 6 km with zero emission characteristics, saving over 30% of the energy consumption of the tram. At present, there are 5,000 km of planned tramways in the country and 2,500 km in 2020. If all the trams use this super capacitor as the main driving power, 219 million kWh of electricity can be saved each year and 2.5 million tons of carbon dioxide emissions will be reduced.
2.8 V / 300 Farah supercapacitors suitable for trolley bus master drive, single charge mileage can be increased from the current 4 to 6 km to 8 to 10 km to achieve the vehicle only at the end of the site charging requirements, but also with charge Discharge speed, long cycle life advantages. Currently, about 60,000 bus buses are updated annually in mainland China. If all the supercapacitors are used as the main driving power source, the annual energy saving will reach 584 million kWh and the emission of carbon dioxide will be reduced by 6.7 million tons.
14 Inch Alloy Wheel is light and suitable for small car for Japan and Euro.
We are the professional alloy wheel manufacturer since 2004, dedicated to low-pressure casting for 15 years. Our main market is to make exclusive mold and high-quality wheels for brands all over the world. Good reputation with 100% brand protection and high quality.
Special Service:
1. We provide timely per-sale and after-sale service: Before the sample/mass production order placed, all details will be checked and confirmed with customers; We can accept sample order for testing first. Also we have a free sample policy if you place an order to us
2. We provide LOGO customizing (Milled Letters and Word) on wheels;
3. Center caps and Carton LOGO customizing;
4. Wheel's finishing can be your requested.
5. We can do forged and Lower pressure
Packing:
Normally packing there are PE foam\ guard ring\cardboard\ non-woven cap\ plastic bag\ instruction book, total packaging with carton. Pallet packaging is also available
Delivery: full painted+ 25-30days, machined face +30-35days
How do you ensure wheel quality and solved quality problem after sales?
Every wheel is physically tested in compliance with JWL VIA or TUV standard; we have internal small label on the wheel rim and steel stamp for control the wheel's production, Our team ensures the production process at every stage and our QC will inspect each procedure as well. While wheels have quality problems, take photos or videos of the problems and our small label send to us. You can send back the problem goods or we will send our representative for inspection. When we confirm it's our problem, we will cut the same account or send the wheels in the next order.
14 Inch Alloy Wheel,Refit Alloy Wheel,Full Painted Wheel,Racing Alloy Wheel
China Wheel (Taishan) Co.,LTD , https://www.tcwwheels.com