Z96-F Meter Counter Mechanical Rotation Counter
Z96-FÂ Â meter counter Mechanical rotation counter
Specification:
Z96-F roll-type counter is designed according to need of user.It's a  kind of counter which is used for measuring length and various kinds of mechanical drive.It usually used for recoring length in spinning,weaving,printing.
1. This counter is five-digit number counting 0-9999,9,when record length of 1Â meter or 1Â yard,the rolling whell turn around three times,the digit in counter show 1,so on and so fouth and carry while ten,and it can count conversely.
2. This counter is equiped with zero-reset,mechanism ,and the zero-reset is adopted with pressure,when having finished pressing,the number are all 0,but pressure is enough,the begin the count in second stage.
Ability:
 The counter changes number nearly,counts exactly,show of number is clear,working on the temperature of -20 between 60.it remains normal counting.
| Model | Z96-F |
| Counting range | 0-9999.9Â Â Â 9999.9-0 |
| Counting rate | 200 counts per minute |
| Transmission ratio | 1:3 |
| Reset mode | Pressing type |
| Dimensions | 158×106×106mm |
| Installation size | 60×52mm |
Â
S JÂ Z96 Z96-FÂ Â meter counter Mechanical rotation counter Z96-FÂ Â meter counter Mechanical rotation counter Z96-FÂ Â meter counter Mechanical rotation counter Z96-FÂ Â meter counter Mechanical rotation counterÂ
Â
Q:How to order our product ?Â
A:1).Please tell us the model and quantity and other request you need.Â
   2).We make the PI for you.
   3).After you confirm the PI, we arrange the order for you after receiving your payment.
   4).After the goods finished, we send the goods out to you and tell you the tracking number.
   5).We will track your goods until you receive the goods.Â
Q:Â Â What's your warranty ?
A: One years
Q: What's your contact information:
A: Our address: Liushi town, Zhejiang province, China.   Â
Q: What's your shipment method?
A: We ship by Express, by air, by sea, by train. Normally we checked and compare, then provide customer the most proper shipment method.
Q: What's about MOQ?
A: First order MOQ=1pcs
Q: If i want to release order, what's the payment method you accept ?
A: We accept T/T, Paypal, Western union, L/C.
Q: If i want to release order, what's the process?
A: Thanks. You can send inquiry to us by alibaba, or send us by email, we will reply within 24hrs.
Thank you & Now pls send your  kindly inquiry !  ^!^
YUEQING YUMO ELECTRIC CO.,LTDÂ Â Â Â Â Â Â Â Â Â Â Â Â Â
TEL:0086-577-62791815Â Â Â Â Mobile:0086-18072050936
Â
Â
How to contact us:
       Send your inquiry detail in the below for free samples, click "send "now.Â
Continuous Waste Plastic Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 25-40 tons.
Flow-chat of Continuous Waste Plastic Pyrolysis Plant
Advantages of Continuous Waste Plastic Pyrolysis Plant
1. Large daily capacity of 25 MT raw materials, and can work 24 hours without any stop for 15-20 days;
2. Auto-loading, auto-discharging and oil coming out at the same time;
3. Only need fuel for the beginning 2-3 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;
4. Low requirement on the raw materials, no need tiny granule, 5cm pieces acceptable for smooth running;
5. High efficiency condensers, more oil output, good quality oil, easy to clean.
6. Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.
7. National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.
8. Easy to operate, need less manpower.
Technical Parameter of Continuous Waste Plastic Pyrolysis Plant
|
NO. |
ITEM |
Technical Parameter |
|
1 |
Suitable Raw Materials |
Small pieces of Waste tyre,rubber, waste plastic≤5cm |
|
2 |
Operating Mode |
Fully Continuous Operation |
|
3 |
Structure |
Horizontal Type Revolve |
|
4 |
Loading and discharging |
Fully Automatic Feeding and Discharging under High Temperature at Same Time |
|
5 |
Capacity(24h) |
8-20Mt |
|
6 |
Work Pressure |
Slightly Negative Pressure |
|
7 |
Oil Yield of tyres |
40%-45% |
|
8 |
Reactor Rotational Speed |
1R/M |
|
9 |
Installation Power |
110kw |
|
10 |
Cooling Method |
Cycle water |
|
11 |
Type of Drive |
Sprocket Wheel |
|
12 |
Heating Method |
Hot Air |
|
13 |
Noise dB(A) |
≤85 |
|
14 |
Main Reactor Weight (MT) |
About 20Mt |
|
15 |
Total Weight(MT) |
About 45Mt |
|
16 |
Installation Space Required |
60m*20m |
|
17 |
Manpower |
2/shift |
|
18 |
Shipment |
5*40HC |
|
19 |
Delivery time |
≤70Days |
Continuous Waste Plastic Pyrolysis Plant
Continuous Waste Plastic Pyrolysis Plant,Continuous Plastic Pyrolysis Plant,Plastic Pyrolysis Plant
Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl