Lubricant Bottle Making Double Station Blow Molding Machine
- Supplying the best scheme of Technik according to your requirements.
- Providing complete equipment scheme from your actual situation.
- Supplying perennial technic consultation and door to door service.
- Optimizing and altering your production equipment.
- Training excellent skillful employees.
Double Station Extrusion Blow Molding Machine TP5D-75
Model TP5D-75
Double station Single head
Extrusion Blow Molding Machine
( 5L Lubricant oil bottles )
*Volume 1L to 5L
*Net Weight 100-280g
*Output 250-380 pcs/hr.
- Single head for making 2L-5L bottles
- Double head for making 0-2L bottles
- 3 die head for making max. 750ml bottles
- 4 die head suitable for max. 500ml bottles
Standard Features
1. Double station blow molding machine with 75mm grooved extruder.
2. Single, double triple and quadruple head capacity.
3. Reliable two-plate axes mould locking.
4. Processing HDPE, LDPE, PP capacity.
5. Multi-blow extrusion heads with quick color change.
6. In machine automatic deflashing and cooling station.
7. Nitrided screw and berrel.
8. Adopt hydraulic accumulators.
9. Low power consumption.
10. Up blowing system.
11. Machine control by microprocessor B&R
12. SERVO valve for hydraulic and 100/300 point Parison thickness.
13. Gripper for bottle take out inside machine.
14. Carriage fast movement by Prop Valve.
15. Safety ladder and rail protection.
Â
Configuration
Â
| Main Part | Brand | |
| Servo oil pump | REXROTH from Germany |
 Â |
| High pressure oil pump | YUKEN from Japan | |
| Pneumatic |
FESTO from Germany or SMC from Japan |
|
| Proportional valves | REXROTH from Germany | |
| Directional valves | YUKEN from Japan | |
| Control system | B&R From Austria | |
| Frequency converter | ABB From Switzerland | |
| Contactor | SCHNEIDER From Franch | |
| Linear roller bearings | HIWIN from TAIWAN | |
| Motor | SIEMENS from Germany | |
| Gearbox | SEW from Germany | |
| Electronic ruler | Novotechnik from Germany | |
Â
A pneumatic tool, air tool, air-powered tool or pneumatic-powered tool is a type of power tool, driven by compressed air, supplied by an air compressor. Pneumatic Tools can also be driven by compressed carbon dioxide (CO2) stored in small cylinders allowing for portability. Pneumatic tools are safer to run and maintain than their electric power tool equivalents, and have a higher power-to-weight ratio, allowing a smaller, lighter tool to accomplish the same task. General grade pneumatic tools with short life span are commonly cheaper and are also called disposable tools in tooling industries while industrial grade pneumatic tools with long life span are more expensive. In general, pneumatic tools are cheaper than the equivalent electric-powered tools.
Air tools were formerly unpopular in the DIY (Do it yourself) market, but are becoming increasingly popular, and have always been ubiquitous in industrial and manufacturing settings.
It is important to know some general specification technical terms used in pneumatic tools while it is also related to how to choose a good air compressor and if the tool can meet your job requirement so that an air tool can be used properly, respectively, Free Speed (rpm), Air Pressure(psi/bar), Air Consumption(cfm/scfm or m3/min), Horse Power(hp), spindle size...etc. Depending on different type of pneumatic tools, there are different specification values that you need to pay attention to.
Flow or airflow, related to air consumption in pneumatic tools, represents the quantity of compressed air that passes through a section over a unit of time. It is represented in l/min, m3, at the equivalent value in free air in conditions of standard reference atmosphere (SRA), i.e. +20 c, 65% of relative humidity, 1013 mbar, in accordance with norms NFE.
Pneumatic Tools
Pneumatic Tools,Pneumatic Cylinder,Pneumatic Fitting,Pressure Gauge
Changzhou Edaweld Trading Company Limited , https://www.edaweld.com