11aaaaa-Carbide Bushing Sleeves for Pump Wear Parts

Model NO.: 1AAAA-CARBIDE-RD-BUSHINGS-51
Balance: Balanced
Surface: Finish Ground
Catageory: Carbide Resistance Parts
Materials: Cemented Tungsten Carbide
Grade: Bk8, Rd08n, Rd06n
Hardness: 88-90 Hra
Application 2: Pump Wear Parts
Applications1: Oild Filed Wear Parts
Application4: Oil Fields Wear Parts
Application: Valve Parts
Name 2: Cemented Carbide Components
Trademark: RYDMET CARBIDE
Transport Package: Standard Packing for Cemented Carbide Rods
Specification: 20MM TO 300 MM HEIGHT
Origin: China
HS Code: 8466939000
Model NO.: 1AAAA-CARBIDE-RD-BUSHINGS-51
Balance: Balanced
Surface: Finish Ground
Catageory: Carbide Resistance Parts
Materials: Cemented Tungsten Carbide
Grade: Bk8, Rd08n, Rd06n
Hardness: 88-90 Hra
Application 2: Pump Wear Parts
Applications1: Oild Filed Wear Parts
Application4: Oil Fields Wear Parts
Application: Valve Parts
Name 2: Cemented Carbide Components
Trademark: RYDMET CARBIDE
Transport Package: Standard Packing for Cemented Carbide Rods
Specification: 20MM TO 300 MM HEIGHT
Origin: China
HS Code: 8466939000
11aaaaa-Carbide Bushing Sleeves for Pump Wear Parts
 
 11aaaaa-Carbide Bushing Sleeves for Pump Wear Parts
 

The Introduction of the cemented Tungsten Carbide Components, Wear Parts.

 Tungsten Carbide or Hardmetal is really a kind of alloy that give you surprise, after so many years of innovation, many grades were developed to cater to the demand of many Industries.



Thanks to so many years of experience and the high accuracy of our machines, we are now almost able to make any types of Carbide Components ( wear Parts) we meet, they have started to reply on Rydmet Carbide's Carbide Wear Comnponents and Wear Parts.


We like to provide the professional solutions for our clients through the satisfied products and service.

Besides the traditional Carbide Seal Faces,Rings, Sleeves, Bushings, Nozzles,Valve Part, Balls, our Engineering Team are always willing to challenge themselves in making irregular Carbide Components and Parts.

The following is some of our Tungsten Carbide Components/Wear Parts we make usually, usually:


• Tungsten Carbide Bushings

• Carbide Sleeves for centrifugal pump

•Tungsten Drill Guide

Carbide Mechanical Sea Faces

Carbide Shaft Sleeves

Carbide Plugs

Carbide Valve Balls.

•Tungsten Carbide Valve Seats and Stems

• Tungsten Carbide Oil and Natural Gas Wear Parts and Components

• Tungsten Carbide Nozzles

• Tungsten Carbide High Pressure Pump Components

• Tungsten Carbide for -Flow Restrictors


• Centrifugal Pump Components

• Centrifugal Carbide Wear Tiles

•  Carbide Wear Parts for Choke Valve, Grate Valve, Control Valve..etc.


we also make the Carbide  irregular carbide components from our clients that we can not name and don't know what is the application at all.




According to the specific Application, the Carbide Wear Parts, Components can be available in Cobalt and Nickel binded Grade and special prepared Grades, which can almost solve all the wear or erosion problems we are facing.

    

Rydmet Standard  Carbide  Grade Chart for Wear Parts, Components
Grade Code Binder Content & Type Hardness (Ra) Hardness Density (g/cm3) Transverse Rupture Strength (TRS) Grain Size
(HV30)
 
RD06X 6% Co 91.5 1530 14.95 2,300 Fine
RD08X 8% Co 90.8 1450 14.75 2,500 Fine
RD15X  15% Co 88.9 1250 13.9 2,700 Fine
 
RD06M 6% Co 90.3 1380 14.95 2500 Medium
RD08M 8% Co 89.5 1300 14.75 2600 Medium
RD011M 11% Co 89.2 1270 14.3 2,650 Medium
RD015M 15% Co 87 1070 14.0 2,650 Medium
 
RD06S  6% Co 93 1790 14.95 2,600 Submicron
RD10S  10% Co 91.8 1580 14.45 2,650 Submicron
 
RD10C 10% Co 88 1160 14.5 2,700 Coarse
FC11C 11% Co 87.5 1110 14.45 2,800 Coarse
 
RD06N 6% Ni 90 1350 14.9 1,800 Medium
RD08N 8% Ni 88.5 1700 14.7 1,900 Medium
RD10N 10% Ni 88 1160 14.5 1,930 Medium
RD12N 12% Ni 87.5 1110 14.1 1,950 Medium
RD06N2 6% Ni+Cr 89 1250 14.2-14.9 1,600 Medium
RD08N2 8% Ni+Cr 88.5 1210 14.0-14.8 1,700 Medium
 
RD06UF 6% Co 94 2010 14.9 3,800 Ultra-fine

 

* Cutstom Sizes are also acceptable.

11aaaaa-Carbide Bushing Sleeves for Pump Wear Parts

11aaaaa-Carbide Bushing Sleeves for Pump Wear Parts
11aaaaa-Carbide Bushing Sleeves for Pump Wear Parts
 





 
 

 

11aaaaa-Carbide Bushing Sleeves for Pump Wear Parts
 
 11aaaaa-Carbide Bushing Sleeves for Pump Wear Parts
 

The Introduction of the cemented Tungsten Carbide Components, Wear Parts.

 Tungsten Carbide or Hardmetal is really a kind of alloy that give you surprise, after so many years of innovation, many grades were developed to cater to the demand of many Industries.



Thanks to so many years of experience and the high accuracy of our machines, we are now almost able to make any types of Carbide Components ( wear Parts) we meet, they have started to reply on Rydmet Carbide's Carbide Wear Comnponents and Wear Parts.


We like to provide the professional solutions for our clients through the satisfied products and service.

Besides the traditional Carbide Seal Faces,Rings, Sleeves, Bushings, Nozzles,Valve Part, Balls, our Engineering Team are always willing to challenge themselves in making irregular Carbide Components and Parts.

The following is some of our Tungsten Carbide Components/Wear Parts we make usually, usually:


• Tungsten Carbide Bushings

• Carbide Sleeves for centrifugal pump

•Tungsten Drill Guide

Carbide Mechanical Sea Faces

Carbide Shaft Sleeves

Carbide Plugs

Carbide Valve Balls.

•Tungsten Carbide Valve Seats and Stems

• Tungsten Carbide Oil and Natural Gas Wear Parts and Components

• Tungsten Carbide Nozzles

• Tungsten Carbide High Pressure Pump Components

• Tungsten Carbide for -Flow Restrictors


• Centrifugal Pump Components

• Centrifugal Carbide Wear Tiles

•  Carbide Wear Parts for Choke Valve, Grate Valve, Control Valve..etc.


we also make the Carbide  irregular carbide components from our clients that we can not name and don't know what is the application at all.




According to the specific Application, the Carbide Wear Parts, Components can be available in Cobalt and Nickel binded Grade and special prepared Grades, which can almost solve all the wear or erosion problems we are facing.

    

Rydmet Standard  Carbide  Grade Chart for Wear Parts, Components
Grade Code Binder Content & Type Hardness (Ra) Hardness Density (g/cm3) Transverse Rupture Strength (TRS) Grain Size
(HV30)
 
RD06X 6% Co 91.5 1530 14.95 2,300 Fine
RD08X 8% Co 90.8 1450 14.75 2,500 Fine
RD15X  15% Co 88.9 1250 13.9 2,700 Fine
 
RD06M 6% Co 90.3 1380 14.95 2500 Medium
RD08M 8% Co 89.5 1300 14.75 2600 Medium
RD011M 11% Co 89.2 1270 14.3 2,650 Medium
RD015M 15% Co 87 1070 14.0 2,650 Medium
 
RD06S  6% Co 93 1790 14.95 2,600 Submicron
RD10S  10% Co 91.8 1580 14.45 2,650 Submicron
 
RD10C 10% Co 88 1160 14.5 2,700 Coarse
FC11C 11% Co 87.5 1110 14.45 2,800 Coarse
 
RD06N 6% Ni 90 1350 14.9 1,800 Medium
RD08N 8% Ni 88.5 1700 14.7 1,900 Medium
RD10N 10% Ni 88 1160 14.5 1,930 Medium
RD12N 12% Ni 87.5 1110 14.1 1,950 Medium
RD06N2 6% Ni+Cr 89 1250 14.2-14.9 1,600 Medium
RD08N2 8% Ni+Cr 88.5 1210 14.0-14.8 1,700 Medium
 
RD06UF 6% Co 94 2010 14.9 3,800 Ultra-fine

 

* Cutstom Sizes are also acceptable.

11aaaaa-Carbide Bushing Sleeves for Pump Wear Parts

11aaaaa-Carbide Bushing Sleeves for Pump Wear Parts
11aaaaa-Carbide Bushing Sleeves for Pump Wear Parts
 





 
 

 

AI Insertion Machine

Ai Operation Intelligent Machine,Insertion Machine,Operation Intelligent Machine,Axial Insertion Machine

KE CHUANG EQUIPMENT(SHENZHEN)CO.,LTD. , https://www.smtkc.com