Tips for Maintaining Your Car’s Transmission
When it comes to car maintenance, most people think about oil changes, tire rotations, and air filter checks. But how much attention do you really give to your vehicle’s transmission? It's easy to overlook, but neglecting it can lead to expensive repairs down the road.
Ignoring your transmission system can have serious consequences. The condition of your transmission directly affects how well your car performs. As your vehicle accumulates mileage, the risk of transmission failure increases significantly. So, what should you be doing to keep it running smoothly?
Common Causes of Transmission Stress
Several factors can put pressure on your transmission system. One of the biggest is heat—especially when driving uphill or under heavy loads. If your car struggles or feels sluggish, try downshifting manually to increase RPMs. If you notice gear slipping or hesitation, it’s time for a professional inspection.
Another common stressor is frequent braking, especially in city traffic. This puts extra strain on the transmission. To reduce this, try to maintain a steady speed and use the parking brake when stopped on an incline. This helps take some of the pressure off the parking mechanism.
Importance of Regular Fluid Maintenance
If you bring your car to a trusted mechanic, they’ll likely ask about your transmission fluid. For automatic vehicles, it’s generally recommended to change the fluid every 15,000 miles. However, it’s always a good idea to check the level yourself before reaching that point.
Look at the dipstick for signs of discoloration—dark or burnt-looking fluid could mean it’s time for a change. Also, check for any leaks around the transmission pan or lines. If you spot any issues, don’t wait—address them early to avoid bigger problems.
At your service appointment, you might be asked whether you want a simple fluid change or a full flush. Here’s the difference:
- Drain and Fill: This is the standard method where old fluid is drained and replaced with fresh fluid. It’s typically done every 15,000 miles and helps keep the system clean and efficient.
- Flush: A transmission flush removes built-up sediment and debris from the system. Unlike a drain and fill, this process should only be done every 50,000 to 100,000 miles, depending on your vehicle’s make and model.
Maintaining Manual Transmissions
Manual transmissions are generally simpler to maintain than automatic ones. They have fewer moving parts, which often means fewer issues over time. That said, regular fluid changes are still essential—every 15,000 miles or as specified in your owner’s manual.
Because of their simpler design, manual systems usually require less frequent and less costly repairs. Still, staying on top of maintenance ensures long-term reliability and performance.
Whether you're due for routine maintenance or need a transmission flush, DaSilva’s Auto Body is here to help. Our experienced technicians provide quality service tailored to your vehicle’s needs. Don’t wait until it’s too late—schedule an appointment today and keep your car running smoothly for years to come.
Car Using Condensator And Evaporator
Application:
Refrigerator, freezer and other refrigeration equipment evaporator
Raw materials:
1) Aluminum Tube: ¢8.0×0.7~1mm
2) Aluminum foil: sheet thickness T = 0.15 ~ 0.25mm
3) Side panel: aluminum plate T=0.8~1.5mm
Main Process:
1.Bending | 2.Stamping | 3.Expansion |
4.Degreasing | 5.Welding Assembly | 6.Leak Detection |
7.Drying | 8.Inspection | 9.Packing |
Technical Specifications:
1) oblique insertion type: fin specification 50×19.05×N; 60×19.05×N (N≥4)
2) Expansion type: fin size 60×28; 52×28
3) Compression type: fin size 50.8×203.2
Can be customized according to customer drawings or sample requirements
Xinxiang Yukun Refrigeration Technology Co. is a production and sales of refrigeration two apparatus parts and sheet metal products, mainly engaged in condenser, evaporator, heat exchanger, reservoir, filter drier, Fin Evaporator (condenser), Stamping Parts, sheet metal parts, aluminum tubes for refrigeration, etc.
Our evaporator and condensers are being supplied to Norway, Russia, Ukraine, Korea, Japan, Pakistan, India, Malaysia, Indonesia, Sri Lanka, Bangladesh, Saudi arabia, Lebanon, Syria, Turkey, Italy, Britain, Spain, Portugal, USA, Chile, Peru, Argentina, Brazil, Russia, Ukraine....for many years.
If you have any interest, pls feel free to contact with us at any time. We can supply copper evaporator and copper condensers according to your drawings or samples.
car,condensator,evaporator
Xinxiang Yukun Refrigeration Technology Co.Ltd , https://www.yukunevaporator.com