Factory Sell Waste Tyre Sidewall Cutting Machine for Tyre Recycle

Used tyre cutting machine is kind of tyre recycling machine for rubber powder production line

 

 

Development space of market:

 

 

 

The method of recycling waste tyre is that separating the inner steel wire and fiber from waste tyres through many  kinds of technologies and grinding the rubber granules into powder.Waste tyre treatment equipment are suitable for international development and management style. It's most advantage is it can recovery waste tyres to rubber granules/powder  reaching to the availability 100%.

 

The rubber powder are widely used and almost covers all industrial fields. It can replace the material  such as plastic and PVC, instead of nature rubber, be rebirth tires .It is used in sport runway and shoe soles, it also can be used to highway, air trip as well as third generation railway sleeper as modification asphalt.

 

 

 

Process:

 

Waste tyres--singe wire drawing machine --Rubber cutter machine -- whole tyre cutting into large blocks(four or two pieces)-- Rubber crusher mill machine (30mm-50mm)--into powder(10-28mesh)--magnetic separator for thin steel  removing--fiber  separator for  rubber removing--packing

 

 

 

Rubber powder application:

 

1. Paving sport ground:

 

Runway, school sporting field, garden path, bowling alley, pavement, recreation field, basketball field, etc.

 

1. Automobile industry

 

Train's floor, disc silk ribbon for braking, soleplate of automobile and truck, shake sleeve, seal stripe, buffer, shock absorber, daily material for ocean shiping, tyres and inner unerlay of tyres, etc.

 

1. Architecture and equipment:

 

Adhensive/sealant, floors of hospital, company, insulated rubber material, carpet cushion, grass cushion for family animal, extruded products, module products, coating, bricks, thin slice, water-proof material, etc.

 

1. Application of geotechnical/asphalt

 

Drainage pipe, asphalt modified by rubber powder which can be used to construct highway and drivingway, filter, adjusting soil/coating layer for road surface, washing pipe with holes, runway for horse race, barrier for traffic or pavement, etc.

 

1. Regenerative rubber

 

Rubber products manufacturing.

 

1. Other application

 

Making coating, paint, activated carbon, etc.

 

 

 

 

 

1. ring cutter
 

This machine mainly used to cut the sidewall of steel wire tire, and then to the next step of segmentation. First, put the tire on the platform, then rotate the hand wheel, the three claws will stick the inner tire firmly. Second, Starting power. Work platform will rotation, cutting tool according to need to cut tire slowly, step by step, until the tire side cut off. 

cutter

 

 strips cutting machine can cut cycle machine to remove the wire tire sidewall cut into strips ,and the width of the adjustable section .Two circular knives for special materials ,hard and durable , can be used repeatedly grinding for no more than 1200 steel tires.

 

3.Block cutter

 

 Block cutter is designed to cut car, truck and rear tractor tire. range is up to 120cm truck tires. the tire cutter adds flexibility to your total tire cutting system by providing you the opportunities of accepting tires up to 120cm into your system ,The unit also allows your system to cut 60-70 truck tires per hour or 120-150 car tires per hour.

4.Bead wire separation

 

 Be utilized to separate rubber and steel wire of bead in order to get whole steel wire .

 

Feature:It is easy operation ,easy to be installed and maintained high efficiency and clean etc.

 

 

 

 

 

5.Tyre crusher

 

This machine is mainly used to crush waste tire and rubber .the structure is gear transmission


 

100% Real Manufacturer,  

 

Welcome to visit our factory and we can show you the machine in working condition:

 

If our products win your interest, please send us inquires with detailed requirement and we will provide detailed information to you. We can also make machines according to your request.  

Used tyre cutting machine is kind of tyre recycling machine for rubber powder production line

 

 

Development space of market:

 

 

 

The method of recycling waste tyre is that separating the inner steel wire and fiber from waste tyres through many  kinds of technologies and grinding the rubber granules into powder.Waste tyre treatment equipment are suitable for international development and management style. It's most advantage is it can recovery waste tyres to rubber granules/powder  reaching to the availability 100%.

 

The rubber powder are widely used and almost covers all industrial fields. It can replace the material  such as plastic and PVC, instead of nature rubber, be rebirth tires .It is used in sport runway and shoe soles, it also can be used to highway, air trip as well as third generation railway sleeper as modification asphalt.

 

 

 

Process:

 

Waste tyres--singe wire drawing machine --Rubber cutter machine -- whole tyre cutting into large blocks(four or two pieces)-- Rubber crusher mill machine (30mm-50mm)--into powder(10-28mesh)--magnetic separator for thin steel  removing--fiber  separator for  rubber removing--packing

 

 

 

Rubber powder application:

 

1. Paving sport ground:

 

Runway, school sporting field, garden path, bowling alley, pavement, recreation field, basketball field, etc.

 

1. Automobile industry

 

Train's floor, disc silk ribbon for braking, soleplate of automobile and truck, shake sleeve, seal stripe, buffer, shock absorber, daily material for ocean shiping, tyres and inner unerlay of tyres, etc.

 

1. Architecture and equipment:

 

Adhensive/sealant, floors of hospital, company, insulated rubber material, carpet cushion, grass cushion for family animal, extruded products, module products, coating, bricks, thin slice, water-proof material, etc.

 

1. Application of geotechnical/asphalt

 

Drainage pipe, asphalt modified by rubber powder which can be used to construct highway and drivingway, filter, adjusting soil/coating layer for road surface, washing pipe with holes, runway for horse race, barrier for traffic or pavement, etc.

 

1. Regenerative rubber

 

Rubber products manufacturing.

 

1. Other application

 

Making coating, paint, activated carbon, etc.

 

 

 

 

 

1. ring cutter
 

This machine mainly used to cut the sidewall of steel wire tire, and then to the next step of segmentation. First, put the tire on the platform, then rotate the hand wheel, the three claws will stick the inner tire firmly. Second, Starting power. Work platform will rotation, cutting tool according to need to cut tire slowly, step by step, until the tire side cut off. 

cutter

 

 strips cutting machine can cut cycle machine to remove the wire tire sidewall cut into strips ,and the width of the adjustable section .Two circular knives for special materials ,hard and durable , can be used repeatedly grinding for no more than 1200 steel tires.

 

3.Block cutter

 

 Block cutter is designed to cut car, truck and rear tractor tire. range is up to 120cm truck tires. the tire cutter adds flexibility to your total tire cutting system by providing you the opportunities of accepting tires up to 120cm into your system ,The unit also allows your system to cut 60-70 truck tires per hour or 120-150 car tires per hour.

4.Bead wire separation

 

 Be utilized to separate rubber and steel wire of bead in order to get whole steel wire .

 

Feature:It is easy operation ,easy to be installed and maintained high efficiency and clean etc.

 

 

 

 

 

5.Tyre crusher

 

This machine is mainly used to crush waste tire and rubber .the structure is gear transmission


 

100% Real Manufacturer,  

 

Welcome to visit our factory and we can show you the machine in working condition:

 

If our products win your interest, please send us inquires with detailed requirement and we will provide detailed information to you. We can also make machines according to your request.  

There are 6 specifications for the Pulse Bag Dust Collector, each of which can be divided into 2 kinds of standard strip A type and open flanged (no ash bucket) B type. The structure is mainly composed of filter chamber, filter bag, net air chamber, ash hopper, ash relief valve, pulse injection device and electronic control box, all of which are welded by welding structure and foam for repair door. The rubber bar is sealed to ensure that the dust collector is tight and air tight. The dust remover has the advantages of good ash cleaning effect, high purification efficiency, high air cleaning efficiency, long service life, small maintenance work and safe and reliable operation. The bag filter is used to remove dust from the conventional pulsator and the chamber. The dust remover has the advantages of strong cleaning ability, high dust removal efficiency, low emission concentration, small air leakage rate, less energy consumption, less steel consumption, less area, stable and reliable operation, and good economic benefit. It is suitable for metallurgy and building materials, cement, machinery, chemical industry, electric power and light industry.

Bag Type Dust Collector Series

Bag Type Dust Collector Series,Bag Type Dust Collector,Bag-Type Dust Removers,Small Bag Dust Collector

Botou Hengrui Environmental Protection Equipment Co. Ltd. , http://www.hrhb126.com