Aeropak Tire Foamy Cleaner for All Tire

Model NO.: APK-8307
Brand Name: Captain
Model Number: ID-503
Spray Rate: More Than98%
Full Dry Time: Less Than 1 Hour
Use: Car Paint
Trademark: CAPTAIN; ILIKE
Transport Package: 450mlx12
Specification: REACH, RoHS, SGS
Origin: Guuang Donmg China
HS Code: 32082010
Model NO.: APK-8307
Brand Name: Captain
Model Number: ID-503
Spray Rate: More Than98%
Full Dry Time: Less Than 1 Hour
Use: Car Paint
Trademark: CAPTAIN; ILIKE
Transport Package: 450mlx12
Specification: REACH, RoHS, SGS
Origin: Guuang Donmg China
HS Code: 32082010
Description:
Tire sealer   fix tire tire sealer fix aerosol tire sealer 
 
 AEROPAKTire Sealer & Inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-undo is needed. One step procedure of tyre bumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage.Non-toxic and odorless. No corrosion and no damage to the tire.
Aeropak Tire Foamy Cleaner for All Tire


Precautions:
 
1. If possible remove object causing puncture.
2. Deflate the tyre; Shake the can well before use;
3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
4. After bumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.


Package:
 
Item No.: APK-8501
Can Size: 65mm Dx 158mm H
Package: 450ml x 12pcs/ctn
Carton Size: 275x205x205 mm
20ft Container Loading 2500 cartons


Aeropak Tire Foamy Cleaner for All Tire
Aeropak Tire Foamy Cleaner for All Tire
Aeropak Tire Foamy Cleaner for All Tire
Aeropak Tire Foamy Cleaner for All Tire
FAQ
Q1. Are you manufacturer?
A: Yes, we Shenzhen i-Like Fine Chemical is a professional manufacturer of aerosol products,  especially in car care products, Aeropak spray paints,  tyre sealer and inflators,  air dusters,  spray adhesives,  etc.  

Q2. What is your terms of payment?
A: Payment terms vary according to order quantity and agency policy, negotiable upon contact.  We'll show you the photos of the products and packages before loading the goods.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 25 to 30 days after receiving your advance payment. 

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply 2-3 samples for free,  but as this is aerosol products with pressurized gas,  it is dangerous goods, the courier cost is very high, say about USD 100-200 for 2kg parcels.  And the freight cost need to be prepaid by customers.

Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ; Only you win first, and then we can win.
A2. We respect every customer as our friends and we sincerely do business and make friends with them, 
no matter where they come from.


Why to be AEROPAK distributor?
1.AEROPAK is US Style design with US standard quality and net weight.
2.AEROPAK products passed required tests and certificates like RoHS, REACH, etc..
3.AEROPAK is individually barcoded for every item and every color, which is good for stock control and retailing.
4.AEROPAK offers POS & SKU CSV information and English Flyers.
5.AEROPAK offers PDF & Printed Catalogue and Colorcharts.
6.AEROPAK's strong R&D will make more and more new products to expand your market shares.
7.AEROPAK will offer great support for your sales, including your information on our website, cans, catalogue and colorcharts, etc., and will offer many differnt gifts for your promotion, even will also support you for your local trade show.
8.AEROPAK will benefit you a reward of 1-2% of your yearly salesvolumet, according to your yearly order amount.
9.AEROPAK will accept upto 10% OA (Open Acount) according to your yearly order amount.
10.AEROPAK will invite our GOLD DISTRIBUTORS to China for a 7-days traveling. 


 
Item No. APK-8201
Can Size 65mm x 158mm H
Package 400ml x 12PCS/CTN
Carton Size 275x205x205 mm
20ft Container Loading 2500 cartons

  Description:
Tire sealer   fix tire tire sealer fix aerosol tire sealer 
 
 AEROPAKTire Sealer & Inflator is designed to quickly seek-out and effectively seal most normal punctures and slow leaks. It is 100% applicable to breach within 6mm on tubeless rubber tyres of cars, motorcycles, electrical bicycles. No jack nor tyre-undo is needed. One step procedure of tyre bumping and repairing is finished in seconds. It can also be filled into new tyres to prevent unexpected leakage.Non-toxic and odorless. No corrosion and no damage to the tire.
Aeropak Tire Foamy Cleaner for All Tire


Precautions:
 
1. If possible remove object causing puncture.
2. Deflate the tyre; Shake the can well before use;
3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.
4. After bumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure.


Package:
 
Item No.: APK-8501
Can Size: 65mm Dx 158mm H
Package: 450ml x 12pcs/ctn
Carton Size: 275x205x205 mm
20ft Container Loading 2500 cartons


Aeropak Tire Foamy Cleaner for All Tire
Aeropak Tire Foamy Cleaner for All Tire
Aeropak Tire Foamy Cleaner for All Tire
Aeropak Tire Foamy Cleaner for All Tire
FAQ
Q1. Are you manufacturer?
A: Yes, we Shenzhen i-Like Fine Chemical is a professional manufacturer of aerosol products,  especially in car care products, Aeropak spray paints,  tyre sealer and inflators,  air dusters,  spray adhesives,  etc.  

Q2. What is your terms of payment?
A: Payment terms vary according to order quantity and agency policy, negotiable upon contact.  We'll show you the photos of the products and packages before loading the goods.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 25 to 30 days after receiving your advance payment. 

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply 2-3 samples for free,  but as this is aerosol products with pressurized gas,  it is dangerous goods, the courier cost is very high, say about USD 100-200 for 2kg parcels.  And the freight cost need to be prepaid by customers.

Q7: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ; Only you win first, and then we can win.
A2. We respect every customer as our friends and we sincerely do business and make friends with them, 
no matter where they come from.


Why to be AEROPAK distributor?
1.AEROPAK is US Style design with US standard quality and net weight.
2.AEROPAK products passed required tests and certificates like RoHS, REACH, etc..
3.AEROPAK is individually barcoded for every item and every color, which is good for stock control and retailing.
4.AEROPAK offers POS & SKU CSV information and English Flyers.
5.AEROPAK offers PDF & Printed Catalogue and Colorcharts.
6.AEROPAK's strong R&D will make more and more new products to expand your market shares.
7.AEROPAK will offer great support for your sales, including your information on our website, cans, catalogue and colorcharts, etc., and will offer many differnt gifts for your promotion, even will also support you for your local trade show.
8.AEROPAK will benefit you a reward of 1-2% of your yearly salesvolumet, according to your yearly order amount.
9.AEROPAK will accept upto 10% OA (Open Acount) according to your yearly order amount.
10.AEROPAK will invite our GOLD DISTRIBUTORS to China for a 7-days traveling. 


 
Item No. APK-8201
Can Size 65mm x 158mm H
Package 400ml x 12PCS/CTN
Carton Size 275x205x205 mm
20ft Container Loading 2500 cartons

 

Leading Laser Measure Module Factory in China
The World's First single transmitting single receiving design laser module, which has a big help to reduce producing cost and power consumption of the Laser Distance Sensor.
This Laser Distance Sensor has high Accuracy up to ±1 mm, working as phase measure, which support RS232/RS422/RS485/Arduino to TTL communication.
This Laser Distance Module is widely used in the Laser Distance Meter industry, also a very good choice for the Industrial applications. Most of measuring tools manufactures is purchasing from us in China.

Product Specifications:


Accuracy

±1 mm (0.04 inch)

Measuring Unit

meter/inch/feet

Measuring Range (without Reflection)

0.03-150m

Measuring Time

0.1~3 seconds

Laser Class

Class II

Laser Type

635nm, <1mW

Size

45*25*12mm (±1 mm)

Weight

About 10g

Voltage

DC2.0~3.3V

Electrical Level

TTL/CMOS

Frequency

10Hz

Operating Temperature

0-40 ℃ (32-104 ℉ )

Storage Temperature

-25~60 ℃  (-13~140 ℉)

Laser Distance Sensor

Range Sensor,Laser Distance Module,Distance Sensor,Laser Measure Sensor

Chengdu JRT Meter Technology Co., Ltd , http://www.jrt-measure.com